Installing the preamp and wiring

Kirk and I decided that the lower bout was a good place for the input jack. Looks like "X" marks the spot . . .

Is it too late to change my mind?

Now, on to the Prismatone preamp, which is installed onto the access panel on the back. The preamp doesn't touch the guitar top or inhibit the vibration of the soundboard.

The battery is accessed through the panel as well- no more fiddling around through the soundhole to change a battery!

Kirk says "I love this battery setup! Click the photos quickly, and you'll get a stop-action movie." It's pretty cool, so I decided to make a .gif of the photos. Enjoy!

After connecting everything, Kirk sent me this photo of the finished guitar, front . . .

. . . and back. Beautiful!

Next time- final thoughts, sound clips, more photos, and how to order your own Craig Dobbins Signature Model!

Craig

P.S. If you can't wait, go ahead and email Kirk Sand or give him a call at 949-497-5570. 

Last few construction photos

One afternoon I received this very excited email from Kirk Sand: "I just strung it up, and it sounds great! Right away! I can't wait to get the electronics in it!"

Here are a few more photos he sent that day. First, installing the Prismatone pickup . . .

A perfect fit! Kirk fashioned the bridge to receive the Prismatone without the need for intonation adjustment screws.

Now, stringing it up . . .

Beautiful! Kirk used D'Addario ProArte Extra Hard strings, with a Savarez Alliance 3rd string.

Here's a closeup of the bridge/pickup area.

And a view through the access panel.

Looking good!

Now, deciding on the input jack location. Endpin or side?

Next time- installing the preamp and wiring!

-Craig

Preamp rout and neck block

With the neck made, Kirk turns his attention to routing. Remember the access panel for the Prismatone preamp? Well, the top needs access too.

Kirk makes a template of the preamp and routs channels in the top for the controls.

The sliders will be accessible on the top of the guitar for quick adjustments.

Next, routing the neck block. Again, Kirk begins by carefully drawing a template.

"Measure twice, rout once!"

Now the neck block is ready to receive the neck . . . when it's finished.

Next time- the fingerboard!

-Craig

Routing for binding

With the box completed, Kirk turns his attention to the binding. "I love binding when I am in the mood or groove for it," he says. "I am really into this one- it will be fun!"

First, routing for the back and side binding.

A careful pass around the entire body creates a channel for the binding.

I told Kirk I wanted red in the binding. My first Kirk Sand guitar has green trim in the Indian rosewood binding, so I wanted something a little different. (I also thought it would look nice against the lighter colored cypress.)  Kirk suggested a black/white/red scheme, bound with Brazilian rosewood to match the soundhole ring. Below are the binding strips, ready for gluing.

You can see how the binding matches the wedge on the back of the guitar.

Another view.

And another.

Both guitars bound.

A view of the access panel.

And a closeup. Says Kirk: "This was fun! I like this cypress/rosewood combo. It's new to me, so it's fresh and exciting."

Next time- binding the top!

-Craig

The box is done

"Hi Craig. Box is done. Ready for the Brazilian rosewood binding!"

When I got this short email from Kirk Sand, I couldn't wait to see the photos. So, without further ado, here they are...

Kirk's signature on the underside of the top, visible through the access panel:

View from the back side. (My best side, so I'm told. Actually, folks tell me the further away I get, the better I look...)

Love the figuring in that Brazilian rosewood! (Have I said that before?)

Closeup of the top. The Brazilian rosewood binding will match the soundhole ring (and the back wedge).

Here's a closeup of the soundhole ring again (before Kirk cut the soundhole), with black/white/red accenting the rosewood. The top will have the same binding scheme.

The top of my guitar, and the back of its twin.

Next time, the binding!

-Craig

Back, preamp, and access panel

Here's the finished back, almost ready to glue to the sides.

But first, Kirk cuts the access panel for the preamp (because this is an electric nylon string guitar, don't you know). You can see the tracing for the cutout below.

My guitar will be amplified with a Prismatone II pickup. My friend Sam Kennedy has re-created the Prismatone, as used by Jerry Reed and Chet Atkins. Paul Yandell said he thought it was the most balanced sounding pickup he ever heard. Sam has also designed a special preamp for my guitar which incorporates the original circuitry, plus volume control and 3-band EQ. The preamp will be accessed through- you guessed it- the access panel, and the slider controls will be on the top of the guitar.

Back to the access panel, after Kirk cuts the opening, he reinforces it with rosewood.

Two sides completed...

Gluing up the other two sides.

My guitar drying...

Both guitars done.

Looking good.

View from the outside. The wood Kirk removed will become the door for the panel, which will rest on the rosewood supports.

Finished and ready to join!

Well, maybe next time we'll glue the back!

-Craig